Estimating and Quantity Analysis Tools
As a result of 3D design tools users are expecting the construction project estimator as a by-product to maintain the quality and producti...
Showing posts with label qa vs qc. Show all posts
Showing posts with label qa vs qc. Show all posts
Research of Quality control in Construction Project
Introduction: Quality is the image of human development, and with the advancement of human progress, quality control will assume an ex...
Hardness and Impact Tests of Steel Using Rockwell Hardness Tester and Charpy Impact Tester
Figure 1: Charpy Apparatus Introduction: In this specific lab, we directed investigations so as to research how diverse warm...
Slope Stability Analysis Using Oasys Slope
Aims and Objectives. The main aim of this project is to analyze the factor of safety of the land slope using various methods s...
Oedometer Test
An office block with an adjacent underground car park is to be built at a site where a 6m-thick layer of saturated clay (g = 20 kN...
How does steel fail in fire?
Failure of steel in fire: When steel is continuously exposed to fire there is a possibility that steel may get fail. The ste...
Difference between the type of air meters used to measure air content of fresh concrete.
There are three types of air meters used to measure the air content of fresh concrete are as follows. Pressure method Volumetric meth...
If water from an untested source is to be used for concrete manufacturing, what test must be made for strength?
If water from an untested source is used for concrete manufacturing a simple test can be done to know the strength of the concrete called ...
The four situations in which the aggregate must be sampled and tested are
This situation is the most common and suited for every commercial business. This is referred as preliminary investigation of a...
Filter with uniformly graded aggregate
A well uniformly graded aggregate should be used in filter because the water does not accumulate if voids are large and the base drain ...
How to define Strength of Aggregate
The conventional technique which increases the strength of aggregates is often referred as stabilizing techniques. As the aggregate...
Difference between inspection and testing
Inspection Testing Done to examine or observe a product to check its satisfaction. Done by applying some me...
Subscribe to:
Posts
(
Atom
)
