Hardness and Impact Tests of Steel Using Rockwell Hardness Tester and Charpy Impact Tester
Figure 1: Charpy Apparatus Introduction: In this specific lab, we directed investigations so as to research how diverse warm...
Showing posts with label Testing Methods. Show all posts
Showing posts with label Testing Methods. Show all posts
Slope Stability Analysis Using Oasys Slope
Aims and Objectives. The main aim of this project is to analyze the factor of safety of the land slope using various methods s...
Oedometer Test
An office block with an adjacent underground car park is to be built at a site where a 6m-thick layer of saturated clay (g = 20 kN...
How does steel fail in fire?
Failure of steel in fire: When steel is continuously exposed to fire there is a possibility that steel may get fail. The ste...
If water from an untested source is to be used for concrete manufacturing, what test must be made for strength?
If water from an untested source is used for concrete manufacturing a simple test can be done to know the strength of the concrete called ...
The four situations in which the aggregate must be sampled and tested are
This situation is the most common and suited for every commercial business. This is referred as preliminary investigation of a...
Filter with uniformly graded aggregate
A well uniformly graded aggregate should be used in filter because the water does not accumulate if voids are large and the base drain ...
How to define Strength of Aggregate
The conventional technique which increases the strength of aggregates is often referred as stabilizing techniques. As the aggregate...
Damage Assessment of Structures
To identify the suitable repair procedure, it is necessary to have a planned approach to investigate the condition of concrete and ...
Subscribe to:
Posts
(
Atom
)
